Crop phenology provides essential information for monitoring and modeling land
surface phenology dynamics and crop management and
production. Most previous studies mainly investigated crop phenology at the site
scale; however, monitoring and modeling land surface phenology dynamics at
a large scale need high-resolution spatially explicit information on crop
phenology dynamics. In this study, we produced a 1 km grid crop phenological
dataset for three main crops from 2000 to 2015 based on Global Land Surface
Satellite (GLASS) leaf area index (LAI) products, called ChinaCropPhen1km.
First, we compared three common smoothing methods and chose the most
suitable one for different crops and regions. Then, we developed an optimal
filter-based phenology detection (OFP) approach which combined both
the inflection- and threshold-based methods and detected the key phenological
stages of three staple crops at 1 km spatial resolution across China.
Finally, we established a high-resolution gridded-phenology product for
three staple crops in China during 2000–2015. Compared with the intensive
phenological observations from the agricultural meteorological stations
(AMSs) of the China Meteorological Administration (CMA), the dataset had high
accuracy, with errors of the retrieved phenological date being less than 10 d, and
represented the spatiotemporal patterns of the observed phenological
dynamics at the site scale fairly well. The well-validated dataset can be
applied for many purposes, including improving agricultural-system or earth-system modeling over a large area (DOI of the referenced dataset:
Phenology is a key indicator of vegetation growth and development and plays an important role in vegetation monitoring (Qiu et al., 2015; Tao et al., 2017; Zhong et al., 2016). Accurate information on the timing of key crop phenological stages is critical for determining the optimal timing of agronomic management options, reliable simulations of crop growth and yield, and analyzing the plant response to climate change (Bolton and Friedl, 2013; Brown et al., 2012; Chen et al., 2018a; Sakamoto et al., 2010, 2013; Wang et al., 2015; Zhang and Tao, 2013).
Field phenological observations are time- and money-consuming. And the observational stations are limited and distributed sparsely. Therefore, the field phenological observations cannot meet the requirements of many purposes such as vegetation monitoring for remote areas with sparse observations and the grid-based earth system simulations. The satellite-based observations with a wide spatial coverage and short revisit times have become a powerful method for monitoring vegetation growth and obtaining vegetation information at regional and global scales. Previous studies have mainly used a vegetation index (VI) to extract crop phenology. For example, Pan et al. (2015) presented a method to construct normalized difference vegetation index (NDVI) time-series dataset derived from the Environment and Disaster Monitoring and Prediction Satellite Constellation A/B (HJ-1 A/B) charge-coupled device (CCD) sensor and extracted phenology parameters. Zeng et al. (2016) detected corn and soybean phenology with the Moderate Resolution Imaging Spectroradiometer (MODIS) 250 m wide dynamic range vegetation index (WDRVI) time-series data. Cao et al. (2015) developed an adaptive local iterative logistic fitting method to fit time series of the enhanced vegetation index (EVI) derived from MODIS and estimated green-up date of spring vegetation. Sakamoto (2018) refined the shape model-fitting method to estimate the timing of 36 crop-development stages of major US crops from MODIS WDRVI time-series data. Crop phenology detected by these studies is relatively accurate. Nevertheless, it cannot be ignored that the VI is overly dependent on the band characteristics of sensors (Atzberger et al., 2014). By contrast, the leaf area index (LAI) is more robust across diverse sensors and more sensitive than the VI to large amounts of vegetation (Verger et al., 2016). In addition, previous studies focused on only very limited areas or very few crops due to the high diversity and complexity of agricultural planting structures (Liao et al., 2019; Liu et al., 2017; Xu et al., 2017; Wang et al., 2012).
To implement a large-scale agricultural-system simulation for multiple crops, there is an urgent need to acquire the gridded-phenology dataset for each crop at a national or global scale. For example, the crop model can simulate crop growth and development and predict crop yields. However, its applications to a large area are limited by the lack of accurate and spatially heterogeneous crop growth information (Curnel et al., 2011; Dorigo et al., 2007; Tao et al., 2009; Jin et al., 2018). According to some previous studies, it could improve the accuracy of model estimation at a large scale by assimilating reliable remote-sensing data into crop growth models (Bolten et al., 2010; Nearing et al., 2012; Ines et al., 2013; Chen et al., 2018a; Huang et al., 2015; Zhou et al., 2019; de Wit and van Diepen, 2007). Among the state variables used in the assimilation, phenology is one of the essential variables because of its critical roles in affecting dry matter accumulation and distribution during the growing stages and reflecting of crop periodic biological changes influenced by various environmental conditions (e.g., climate; Jin et al., 2018; Zheng et al., 2016).
In this study, using a remotely sensed Global Land Surface Satellite (GLASS) LAI product (2000–2015; Xiao et al., 2014), we aim to (1) choose the most suitable smoothing method to reduce the noise of the LAI time series for different crops and regions, (2) detect the phenological information of three staple crops (i.e., maize, rice and wheat) at 1 km spatial resolution across China and evaluate its accuracy by comparing with the observed data at agricultural meteorological stations (AMSs) of the China Meteorological Administration (CMA), and (3) explore the spatial patterns of different phenological stages. The resultant remote-sensing LAI-based crop phenology dataset with 1 km spatial resolution across China (ChinaCropPhen1km) will benefit the understanding of crop phenological dynamics, climate change impacts and adaptations, and agricultural-system modeling over a large area, temporally and spatially (Luo et al., 2019).
The study areas across mainland China are characterized by complex environments and crop planting structures, diverse cropping intensity, and cultivation habits (Fig. 1a; Piao et al., 2010; Zhang et al., 2014a). Additionally, we divided the whole study area into different subregions for each crop based on the cropping system and growth environment (Fig. 1b, c, d). More details of the subregions for each crop are shown in Tables S1–S3 in the Supplement. Rice, wheat and maize are the three staple crops in China, together accounting for 59 % of the total planting area and 92 % of the grain yield in 2017. Roughly half of the cropland in China is multi-cropped, such as the double-cropping system of wheat–maize in the North China Plain and the rotation system between early-season rice and late-season rice in southern China (Frolking et al., 2002).
The spatial distribution of agricultural meteorological stations
(AMSs) in studied areas
An improved MODIS-based LAI dataset (GLASS LAI) from 2000 to 2015 was from
Liang et al. (2013;
In addition, the cultivated-land layer derived from the 1 km National Land
Cover Dataset (NLCD) of China was used as cropland masks. Specifically, we
detected the key phenological dates for dryland crops (i.e., maize and
wheat) and paddy rice, which were restricted on the dryland and paddy field
layer derived from the NLCD, respectively. NLCD was provided by the Data Center
for Resources and Environmental Sciences, Chinese Academy of Sciences
(
The crop phenology observation records from 2000 to 2013 of maize, rice and
wheat crops were obtained from AMSs, which were governed by the CMA
(
The method to retrieve the phenological information of three staple crops at the national scale is presented schematically in Fig. 2. The data processes are as follows: (1) data preprocessing, (2) selecting the cropland sample grid to determine the suitable smoothing method, (3) determining the optimal filter-based phenology detection (OFP) approach and (4) generating the ChinaCropPhen1km dataset.
Flow chart of procedures for data analysis and crop phenological date identification.
Due to the differences among these datasets on the projected coordinate system, firstly, we projected or re-projected all raster data to “Asia North Albers Equal Area Conic” by using the Project Raster tool in ArcGIS. Then, we combined 46 annual GLASS LAI images together and used a China provincial administrative vector map to mask images by province. Finally, a LAI time series was created for each pixel for further applications.
Previous studies have proposed different smoothing methods to reduce the noise of GLASS LAI time series and found that the OFP method varied by studied times, areas and objectives (Zhao et al., 2016; Wang et al., 2018). Three commonly used methods were chosen in the study to smooth the LAI time-series curves, including the double logistic (DL) method, Savitzky–Golay (S-G) filter method and wavelet-based filter (WF) method.
The double logistic method is a method of merging local fitting parts to obtain the
overall fitting result (Jonsson and Eklundh, 2004). In the local fitting
process, the double logistic function can be expressed as
Based on locally adaptive moving window, the S–G filtering
method can be used to smooth data and suppress disturbances with a local
polynomial regression model (Savitzky and Golay, 1964). The algorithm can be
summarized as follows:
The wavelet-based filter method can reduce noise with reflecting the periodicity
of seasonal vegetation change (Sakamoto et al., 2005). The input signals
The advantage of the WF method is that it can maintain the time components
of time-series data and hardly distort signals. The input signal
The methods to detect remote-sensing-based phenology can generally be classified into three groups: the inflection-based method (Chen et al., 2016), threshold-based method (Manfron et al., 2017), and methods based on the mathematical or geometrical model-fitting approach (Sakamoto et al., 2010). In this study, we used both the inflection- and threshold-based methods together to detect phenology. Firstly, we defined the inflection and maximum points of LAI time series as the specific timing of key phenological stages for different crops (Fig. 3).
Typical phenological curves for different cropping systems in China.
We defined the date of inflection point (the first derivative increases continuously after this point or the second derivative equals 0) of the LAI time-series curves as the green-up date of winter wheat, emergence date of spring wheat, transplanting date of rice and V3 stage (early vegetative stage of maize when the third leaf is fully expanded) of maize (Sakamoto, 2018; Sakamoto et al., 2005, 2010). Before the inflection point, the LAI values are kept low for a long time, and then they start to increase continuously after this point.
The heading date in the study was defined as the day when the LAI reaches the maximum, similar to some previous studies (Sakamoto et al., 2005; Chen et al., 2018b) – that is to say, the maximum LAI points in the time-series curve are regarded as the heading dates.
When crops reach maturity, the physiological activity will change largely, leading to an abrupt decrease in LAI (Sakamoto et al., 2005; Chen et al., 2018b). Therefore, we regarded an inflection point in the LAI time-series curve, where the first derivative is negative with the largest absolute value, as the maturity date.
Based on the observations around the nearest AMS, we needed firstly to determine the restricted time windows responding to each key phenological stage for different crops. Then we randomly sampled 1000 grids every year in each province from the grids where the land use data were identified as cropland and retrieved the key phenological stages in the sampling grids according to the three smoothing methods and the above definitions of key stages. To determine the OFP approach in each province, we identified the inflection points and maximum value point of each LAI time-series curve at each grid within the restricted time windows. After detecting phenological information of the cropland sample grids, we calculated the RMSE values between the estimated phenological dates and observed dates and averaged those RMSE values for each crop at a provincial scale. Finally, we chose the most suitable smoothing method for different crops in each province with minimum RMSE.
After removing the grids from where the land use data were identified as non-cropland, we then obtained cropland grids where the phenological information is detected. Then, the most suitable smoothing method for different crops in each province were applied to reconstruct the LAI time series at the 1 km grid scale. Finally, we detected the key phenological dates using the OFP approach and determined the cultivated grids for each crop on the basis of three key phenological stages that could be identified simultaneously. For example, if the green-up date, heading date and maturity date (corresponding to the inflection and maximum points in LAI time series) of winter wheat could be simultaneously detected for a specific grid, then it could be regarded as the cultivated grid of winter wheat. Additionally, to evaluate the accuracy of the estimated phenological dates at a national scale, we calculated the mean of phenological dates detected from each crop pixel around the corresponding AMS and compared them with the corresponding observations by using the RMSE.
The smoothed time profiles of the LAI generated by different smoothing methods are shown in Fig. 4. Both the S–G filter and WF method can smooth LAI time series well – that is to say, the generated time profiles of the LAI match well with the seasonal tendency of the observed LAI time series in the field. In addition, both methods can clearly characterize the local changes in the time component and maintain the time components of LAI time-series data. Although the DL method performs poorly for smoothing LAI time series of the double-season crops, it is still reliable for single-season crops. These findings were consistent with those in some previous studies (Zhu et al., 2012; Sakamoto et al., 2005; Qiu et al., 2016).
Comparisons of different smoothing methods for different cropping systems.
We further compared mean RMSE of different smoothing methods and selected the most suitable smoothing method with minimal mean RMSE for different provinces and crops (Table 1). If the RMSE values were the same, we also compared the number of crop grids according to different smoothing methods and selected the suitable method which had identified a larger number of crop girds. It is noted that the number of identified grids differ considerably even with same RMSE values. Totally, the S–G filter was an overwhelming smoothing method for 95 % crops and provinces, followed by the WF and DL method.
Mean RMSE (in parenthesis) of the most suitable smoothing method for different regions and crops.
We ascribed the great performance of the S–G to two reasons. (1) Its scientific smoothing principle is as follows: the S–G filter applies an iterative weighted moving average filter to the time series, which can replace the noise data as well as keep the fidelity (Geng et al., 2014). By contrast, the WF method decomposes the time series into scaled and shifted wavelets to acquire time localization of a given signal (Qiu et al., 2014). The DL method uses a series of parameters to fit the time series (Beck et al., 2006). (2) S–G is more suitable for the GLASS LAI. S–G can catch the local variations – e.g., the bimodal curve characteristics from double-cropping rice and the rotation of winter wheat and summer maize (Fig. 3b, f) – in time series and perform the best for data without extreme noise, such as those of the GLASS LAI (Eklundh and Jönsson, 2015). The DL method is more useful for data with much noise; however, it fails to identify local changes due to being unfit for data with double peaks. The WF method is also a powerful tool for processing non-stationary and noisy signals such as VI time series rather than the GLASS LAI (Rouyer et al., 2008; Sakamoto et al., 2006). Therefore, S–G is the most suitable for the complex cultivating systems across all of mainland China. We also attributed the excellent performance of S–G to the phenological extraction rules established in this paper and the goal of accurately extracting the crop cultivation grids as well as key phenology stages. For example, the WF smoothing method might eliminate pseudo-inflection points that may not be pseudo due to the uncertainty of GLASS LAI data and misidentify non-crop grids by inflection- and threshold-based methods, consequently resulting in very few crop grids being identified (Qiu et al., 2016).
The comparison between retrieved phenological dates and phenological
observations of each crop from 2000–2015 at the national scale showed that all
retrieved and observed dates were closely and averagely distributed on the
Comparisons between retrieved and observed phenological dates for
rice
Mean RMSE between retrieved phenological dates and phenological observations.
As for the differences among crops, the retrieved accuracy of maize
phenological stages was consistently the worst, with the biggest RMSE and
errors (
More interestingly, the retrieved accuracy of three crops decreased as crops
grew and developed up to maturity periods (Table 2), with the average
RMSEs ranging from 3.7 to 7.2 d. The highest accuracy (RMSE
Annual mean phenological dates and growth periods of different crops in each subregion.
VGP means vegetative growth period – the difference between heading and
transplanting or green-up or emergence or V3 dates. RGP means the reproductive
growth period – the difference between maturity and heading dates. GP
Nevertheless, overall the retrieved phenological dates for the three crops
are in strong correspondence with the observational dates (
We showed the annual averages of each key crop growth stage to indicate
their spatiotemporal patterns due to the similarity in inter-annual patterns
for a certain crop over the 16 years (Figs. 6–7, Table 3 and Supplement Figs. S1–S4).
Besides summarizing the key stages by crops and subregions, we also
calculated three crop growth periods, including the VGP (vegetative growth
period), RGP (reproductive growth period) and GP
Spatial patterns of annual averages of three key phenological dates
during 2000–2015 for rice
Box plots of three key phenological dates by crop and subregions
during 2000–2015 for rice
As for wheat, green-up and emergence dates ranged most widely (DOY 30–128) when compared to other crops. Winter wheat in subregions II and IV had earlier green-up dates, while spring wheat in subregions I and III had later emergence dates (Table 3; Figs. 6b, 7b). Moreover, along with the latitudes from the north to the south (excluding subregion III because of the sparsest wheat cultivation being there), the first key dates were earlier, but with shorter growth periods (106, 93 and 92 d for I, II and IV) due to the sufficient temperature and light in subregion IV (Yu et al., 2012; Fig. 8b). Interestingly, the heading and maturity dates in the three subregions showed consistently the same spatial patterns as those of the first stage, with latitudes decreasing (Figs. 6b, 7b).
Box plots of three key phenological periods by crop and subregions
during 2000–2015, for vegetative growth period (VGP);
reproductive growth period (VGP); and whole growth period (GPW) of rice
Both spring and summer maize types were concurrently cultivated in subregions III and IV, while only one of them was cultivated in subregions I and II, the main planting areas of northern China (Figs. 6c, 7c; Table 3). V3 of summer maize was approximately 43 d later than that of spring maize (DOY 161 vs. 117), but its maturity dates were very close (DOY 259 vs. 245), which thus caused a shorter growth period for summer maize, especially for subregions II and III (some 84 d; Fig. 8c). Additionally, in three subregions (I, III and IV) for spring maize, like wheat, the spatial patterns of the three key stages for maize were similar in spatial patterns with increasing latitude. Finally, the key dates and periods were the most variable in subregion IV (Figs. 7c, 8c).
In sum, the spatial patterns of key phenological stages varied by crops and cultivation methods. In addition, early-season rice and single-cropping rice in subregion III, wheat in subregion III, and maize and rice in subregion IV showed larger variability than other crops due to the mixed planting of heterogeneous varieties of the same crop. Many factors could impact crop phenology, such as climate, environment, farmer's behaviors, technological development and human activities (Liu et al., 2016, 2018). Different from natural ecosystems such as wild forest or grassland, three main crops cultivated across the mainland of China did not reach green-up or flowering dates in sequence with latitude, especially for rice (Zhang et al., 2014b, 2015; Tao et al., 2014). Moreover, climate conditions did impact crop phenology. For example, increased temperature led to the advanced heading and maturity date of crops in China (He et al., 2015; Tao et al., 2014). At the same time, crop management activities, such as cultivar shift and the adjustment of the planting and harvesting date, largely affected crop phenology (Tao et al., 2006, 2013).
To interpret the changes of the three key phenological dates and growth
periods from 2000 to 2015, we analyzed their trends at the pixel scale and
summarized the grids with a significant trend (
The trend (d yr
Note: definitions for the VGP, RGP and GP
The trends of three key phenological dates during 2000–2015 by crop and subregions for rice
The trends of three key phenological periods during
2000–2015 by crop and subregions. VGP stands for vegetative growth
period; RGP for reproductive growth period; and GPW for whole growth period
of rice
For rice, transplanting dates were consistently advanced by
Compared with the significant changes in phenological dates, the duration of
phenological periods changed with fewer pixels (
The duration of growth periods was prolonged, especially for the whole
growth period (GP
Inevitably, there are still uncertainty in the generated dataset (i.e., ChinaCropPhen1km). On the one hand, GLASS LAI products might lead to some uncertainty in ChinaCropPhen1km. First of all, the noise of the original GLASS LAI time series could reduce the accuracy of detected phenological stages, which resulted from many factors, such as cloud, snow, aerosols and water vapor (Xiao et al., 2014). Therefore, we compared several commonly used smoothing methods and chose the most suitable one with minimum RMSE for different crops in each province, which could reduce some uncertainty. Moreover, the GLASS LAI retrieval algorithm eliminates abrupt spikes and dips, which may result in the loss of neighboring smaller peaks in LAI profiles (Xiao et al., 2016). The number of detected pixels with the double-season rice cultivated might be less than that of the actual situation due to the short interval between the two local maximum points (i.e., heading stages of early-season rice and late-season rice; Fig. 3f). On the other hand, the mixed pixel might bring uncertainty in the results, as it contained several land cover types and then weakened the identified signal of specific phenological stages. We ascribed the occurrence of mixed pixel to two reasons. One is the coarse spatial resolution of 1 km. For example, the mixed pixel occurs widely in the mountainous regions (e.g., southern China) with complex terrain and diverse vegetation types. The other is that we determined the spatial distribution of each dryland crop (i.e., maize and wheat) based on the dryland layer of NLCD, which might include several crop types. In future studies, the application of a crop-specific map and remote-sensing products with finer spatial resolution is expected to solve the mixed pixel issues.
The derived crop phenological dataset for three staple crops in China during
2000–2015 is available at
In the present study, we generated a 1 km gridded-phenology dataset for three main crops from 2000 to 2015 based on GLASS LAI products, called ChinaCropPhen1km. First, we compared three common smoothing methods and chose the most suitable one for different crops and regions. The results showed that S–G was the most frequently chosen method, as it could not only smooth the time series well but also keep the fidelity. Next, we developed an OFP approach which combined both the inflection- and threshold-based method to detect the key phenological stages of three staple crops at a spatial resolution of 1 km across China. Finally, we established a high-resolution gridded-phenology product for three staple crops in China during 2000–2015.
The ChinaCropPhen1km dataset was validated well using the intensive phenological observations of AMS, which substantiates high accuracy, with errors of retrieved phenological date of less than 10 d. It can reflect the spatial differences in the local climatic and management factors. Thus, this first high-resolution crop phenological dataset can be applied for many purposes, including understanding land surface phenological dynamics, investigating climate change impacts and adaptations, and improving agricultural-system or earth-system modeling over a large area, temporally and spatially.
The supplement related to this article is available online at:
ZZ and YC designed the research. YC and ZL collected datasets. YL implemented the research and wrote the paper. ZZ and FT revised the paper.
The authors declare that they have no conflict of interest.
We would like
to thank the high-performance computing support from the Center for Geodata
and Analysis, Faculty of Geographical Science, Beijing Normal University
(
This research has been supported by the National Key Research and Development Program of China (project nos. 2019YFA0607401 and 2017YFD0300301) and the National Basic Research Program of China (grant nos. 41977405, 31561143003, 31761143006).
This paper was edited by Birgit Heim and reviewed by two anonymous referees.